Why Choose a Valve with a Dead man Handle?
The Deadman Hand levalve otherwise known as spring return lever is used for a specific purpose. Instead of removing media from drums and tanks, add supplements to the media. It is quite difficult to do any job that requires unattended valves that should not be opened. The dead man handler makes it easy to achieve this task so simple.
What is a Deadman Handle?
The real origin of Monica, deadman handle, may not be traceable, but its meaning is very simple. Another name is Deadman Switch. Basically, it’s a joke when the operator suddenly dies, a tragedy however, which means that the switch and the steering wheel move automatically. In this way, the KP-LOK valve uses a ball valve equipped with a deadman handle. It closes automatically when you leave the handle. This is due to the influence of spring. When no force is applied to the spring, the handle returns to its original position.
This is required in every factory and shop, and there is a list of potential applications with almost no restrictions performs by it.They all perform the same task but have different models. The following are just a few examples.
Bonomi 1.2 “LF 250N, Deadman Handle / Direct Mount Ball Valve w- brass housing, a blowout preventer remains, heavy dead switch, the mounting holes of the appropriate equipment, 366 ° F, the maximum rated pressure temperature was 600-150 WSP .LF is a lead-free chrome-plated brass ball with a blue vinyl handle.
Apollo 1-1 / 2 “76-507-01, Stainless Steel Ball Valve and Deadman Handle – Complete Threaded Connection Port FNPT, PTFE Seal, Builds RPTFE Yours, Dry Bag and The film material is a multi-rounded (MPTFE) stainless steel body, dead handle made of stainless steel, yellow vinyl. The maximum pressure is 1500 psi.
Bonomi 2 “250 NLF SRL directly ball valve support – lead-free brass housing, blown bracket, ANSI full port bolting, heavy steel blue vinyl handle maximum temperature rating of 366 ° water W 600 WOG – 150 WSP, chromed brass ball, PTFE seat, low torque.
Where to Buy
In most cases, multiple applications require ball valves with safety deadman handles in production lines, stores or manufacturing facilities. We offer different sizes and big brands. We have been in the industrial sector for over 50 years. If you need to buy a valve, buy it from someone who only sells the valve –which is us and we do it better than others.
We have the new deadman handle with the new industrial standard ISO 5211 actuator mounted pad. Compared to the “low panel mounting pat” used by competitors, our mounting pats are rugged and durable. The deadman handlesspring return ball valves are full port and thick-walled stainless steel. They do not bend like the others competitors’ dead man handle spring return ball valves
Integral full-port design
The spring ball valve of the dead handle is full of connections. Most drivers use standard valve connections or reductions in valves and valves. You must therefore let the rod compete with the opening of the valve.
Most deadman ball valves use self-locking spring and diaphragm washers. Most competitors use a thin Teflon package and you must readjust the handle to a specific package. Our valves last longer and require less maintenance.